[email protected]

ALLOY C276 DATA SHEET - Jacquet Metals

Yield Strength 0.2% Offset Ultimate Tensile Strength Elongation Hardness psi MPa psi MPa % in 2" Rb minimum 50.3 347 107.4 741 67 89 Temperature Yield Strength 0.2% Offset Tensile Strength Elongation °F °C Ksi MPa Ksi MPa % in 2"-320 -198 82 565 140 965 45 150 101 70 480 130 895 50 70 21 60 415 115 790 50 200 93 55 380 105 725 50 Effect of energy density on the interface evolution of Jun 09, 2020 · Tensile testing revealed that the interface had an average yield strength of 398 ± 33 MPa and UTS levels of 564 ± 31 MPa (Fig. 5 b) across the laser powers used. These properties are higher than those typically found in wrought 316L [ 25 ].

HAYNES 625 alloy

HAYNES® 625 alloy (UNS N06625) is a nickel- chromium-molybdenum alloy with excellent strength from room temperature up to about 1500°F (816°C). At higher temperatures, its strength is generally lower than that of other solid-solution strengthened alloys. Alloy 625 Inconel 625 TiG Weld Metal Electrodes & Alloys Tensile Strength 114,000 PSI (790 MPa) Yield Strength 85,000 PSI (590MPa) Elongation 27%. Welding Current & Instructions. Recommended Current:DC- (100% Argon gas should be used to minimize burn-off of the tungsten electrode) Welding Techniques:Insure welding surface is free of contamination. Inconel 625:Properties, Applications and Production

  • Inconel 625 PropertiesProduction and ProcessingApplications of Inconel 625Exceptional material strength
    The strength of Inconel 625 lies not only in its nickel-chromium base but also the hardening mechanism of niobium and molybdenum. The alloy matrix is strengthened by the interaction of niobium with molybdenum that offers high strength without the need for precipitation-hardening treatment. The tensilHigh temperature resistance
    With a melting point of about 1300°C and a thermal expansion coefficient of 1.28 x 10-51/K (at 20°C), Inconel 625 resists a wide range of temperature extremes from cryogenic to extremely high. At high temperatures in the presence of oxidising agents, the titanium and niobium compositions of the oxide filCorrosion resistance
    The unique combination of its components makes Inconel 625 highly resistant to corrosive substances. This is the reason why this superalloy works excellently under high saline seawater, and more so in milder environments such as fresh water and standard atmospheric conditions. Upon exposure to oxidiWelding HY Steel and the Precautions You Should TakeApr 02, 2018 · Welding HY Steel and the Precautions You Should Take. Welding the HY steels refers to the process of welding a family of high yield strength metals. These metals were created in the form of thick plates at the request of the United States Navy for use in the fabrication of ship hulls and submarines. Submarines need to operate 100 meters or

    LDX2101 Stainless Steel - Penn Stainless

    (.625 Plate) Typical values (.625 Plate) 0.2% Yield Strength:ksi:65:69:Tensile Strength:ksi:94:101:Elongation % 30:38:Hardness (Brinell) HB:290 (max) 225 Metal Strength Chart - Mechanical Properties Chart of Mar 27, 2020 · Strength is a critical factor in metal uses, for example, some applications require stronger aluminum parts, while some products need high steel hardness or yield strength of steel, this may determine the selection of CNC machining material or product design. Here we collect the metal strength chart (tensile, yield strength, hardness, and density included) and mechanical properties SelectAlloy 625-APSelectAlloy 625-AP is a gas-shielded, flux cored, nickel based electrode designed to weld in all positions. It has a nominal weld metal composition of 22% Cr, 9% Mo, 3% Fe, 3.6% Nb, balance Nickel. It is primarily used for welding alloys 625, 601, 802 and 9% nickel to themselves and to steel. It is also widely used for surfacing steel and for joining other nickel based alloys to steel. SelectAlloy 625-AP is

    Thermanit 625 - alruqee

    2.4856 - Alloy 625 - UNS N06625 - NiCr22Mo9Nb 2.4858 - Alloy 825 - UNS N08825 - NiCr21Mo and combinations of aforementioned materials with ferritic steels up to S355J, 16Mo3, 10CrMo9-10 and 9% Ni steels. Typical analysis of all-weld metal (wt.-%) C Si Mn Cr Mo Ni Nb Fe wt-% < 0.04 < 0.7 < 1 21.5 9.0 Bal. 3.3 < 2.0 Structure:AusteniteThermanit 625 - Alruqee GroupThermanit 625 TIG rods, nickel-alloy 05/2015 Mechanical properties of all-weld metal Heat-treatment Yield strength R p0.2 Yield strength R p1.0 Tensile strength R m Elongation A (L 0=5d 0) Impact work ISO-V CVN J MPa MPa MPa % +20 °C 196 °C aw 460 500 740 35 120 100